Yes the Timbren Front Suspension Enhancement System # TFF550SDE will fit the 2 and 4 wheel drive models of the 2022 Ford F-450 Super Duty. view full answer...
While we have an option for a ladder rack and tonneau cover that fits your 2018 Ford F-450, there isn't a tonneau cover that will work with a rack that mounts inside the bed rail. The reason for that is all tonneau covers either use or sit up against the bed rail when installed, so there would be interference with a rack.
The best option is going to be a ladder rack that mounts on top of your F-450's bed rail, and a tonneau that mounts inside the rail. For the rack, what you will need... view full answer...
Using a Curt Q20 with the Curt OEM 5th-Wheel Hitch Legs for Ford Super Duty Towing Prep Package # C16017 will naturally sit a little lower than the Curt Q20 on a rail system. This sometimes can cause the clearance to be low. Another factor could be the truck itself. If your new F-450 sits higher than your F-350 that could be playing into it as well.
Your Head Unit for Curt Q20 5th Wheel Trailer Hitch # C16530 does have 3 height adjustments. I would ensure that the Q20 head is installed... view full answer...
Yes; the Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount # AL25980EZ comes with an upgraded heavy duty compressor that will work well on your 7500XL air bags. view full answer...
We do offer one shock absorber kit for 8,000 lb, 3-1/2" diameter trailer axles in the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers part # RM-2470 which are a mostly bolt-on fit. If you have a triple axle then you'll also need the Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers part # RM-2470-50. These shocks will do a great job of helping reduce road shocks helping keep the trailer in better condition and making for a smoother ride in the tow vehicle. view full answer...
We can tell you how to determine the correct Goose Box that will fit your 2021 Fuzion 429 toy hauler, but that will depend on the current model of pin box you have now, and we don't have a way of knowing what is currently on it. So to determine the correct option, you will need to check your pin box for a sticker or placard that will have the pin box number on it, or you can use the article I linked below on choosing your pin box, which tells you how to measure your pin box to determine... view full answer...
You can use a slider even on an 8 foot bed. You would use # RP30048 that you have referenced. When slid back it will give you an additional 10 inches of clearance. You will just need to remove the head and cross member from your existing fixed 5th wheel hitch and bolt it to the slider base. I have included a link to the instructions for you. view full answer...
There is not a plug-in adapter; you'll need to splice into the reverse light wire on your Ford Super Duty. The correct part for that is the following:
- Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter # 20036 view full answer...
The Firestone Ride-Rite helper springs you were looking at, part # F2583, is compatible with the factory gooseneck hitch in your 2014 Ford F-450 dually. The factory hitch won't cause any issues with the installation. view full answer...
We can get your 2019 Ford F-450 set up with camper tie-downs for a truck camper, and what you will need is the following, so long as you A) have the factory trailer hitch and B) do NOT have factory flip-out steps that are mounted under the truck bed.
There are two options, and while both use steel brackets, one has steel tie-down inserts while the other has aluminum tie-down inserts. I do recommend the aluminum due to them being completely rustproof, though they are the more premium option... view full answer...
I reached out to my contact at AutoWBrake and he was able to confirm that the Autowbrake Electric Brake Controller # 3430001 can be installed onto the rear of a vehicle like you mentioned.
He mentioned that it was tested in that manner during development with great success and has multiple Motorhome customers that have it installed that way currently.
This would be a very clean low-profile install that would be easily controlled by the included key fob.
All that would be required is... view full answer...
Nope, there are only two shanks that are compatible with the 30,000 lb TorkLift SuperHitch Everest Weight Distribution System # TLWD1000:
- Adjustable Shank for TorkLift SuperHitch Everest Weight Distribution - 12-1/2" - 30,000 lbs # TLM9010
- Adjustable Shank XL for TorkLift SuperHitch Everest Weight Distribution - 17-1/2" - 30,000 lbs # TLM9011
The 12-1/2" and 17-1/2" are referring to the height of the shanks, and these are the only two compatible with the Everest. Then for a hitch... view full answer...
We don't have trailer specific fits on these but it looks like the GVWR of the Montana 3710FL is going to be around 16500-llbs; 4 of the Provider # A16RG8BML80 with a capacity of 4,450-lbs each will give you 17,800-lbs total capacity. You will want to make sure your current wheels or hubs are 8 on 6-1/2 bolt pattern, but as long as they'll fit on your current hubs then you can use these without any issues and they'll give you a good looking wheel for your Montana.
I've linked a review... view full answer...
The Buyers Products Hitch Plate with 2" Receiver Tube - Ford # 3371809060A will fit Ford models F350/F450/F550 but is designed for the cab and chassis models so if you have the regular pickup bed this may not work and you'll want to consult with someone who is comfortable with fabrication to ensure this will work for your application.
I'm attaching a dimensions photo as well as a review video for you to check out. view full answer...
While you wouldn't be able to weld another 2" receiver on, there is a solution for your 2020 Ford F-450 to use your hitch-mounted flag pole mount with the MORryde Hitch Mounted Trailer Stabilizer for 2" Trailer Hitches # MR22AR.
What you would do is add a TorkLift hitch that has two receivers, with the bottom being a 2" receiver and the top being a 2-1/2" receiver, though it does come with a 2" adapter sleeve. The correct fit for your '20 F-450 is the following:
- TorkLift SuperHitch... view full answer...
While it hasn't been tested, the Height Adjustment Kit for MORryde RV Cargo Sliding Trays # MR34VR just simply bolts to the slide tracks of the MORryde trays so you could just drill holes in the slide tracks of your Kwikee sliding tray to mount it on the height adjusters. view full answer...
They sure will!
I reached out to Torklift and the Front tie down # TLF2021A and rear tie down # TLF3008A are indeed a confirmed fit for your 2022 Ford F-450 Super Duty given you do not have any steps going underneath the bed. view full answer...
The # AT91367 will not work with your Atwood OD-5001 water heater. Like you mentioned, the replacement boards have been discontinued, so really the only option we can offer is a new water heater. I fully realize it's not what you are wanting to hear, but it's the best we can do to get you a working water heater.
Your Atwood is an on-demand water heater and for something similar go with a tankless, the Fogatti RV Tankless Water Heater - Black # LSB44FR or White # LSB64FR.
These fit in... view full answer...
If your 2001 Ford F-450 features a flat or dump bed, the Buyers Products Hitch Plate Bumper # 3371809055 will fit and work well. This is designed for cab and chassis trucks like yours with the nominal 34" frame width. Hardware is not included with the hitch but this is something you can obtain from a local hardware store. Please note that Buyers states the hitch should be both welded and bolted to the frame, with at least two 3" welds per side.
I have attached a short video review that... view full answer...
The Demco Recon, part # DM8550045, can be used with a Trailair pin box. The only pin boxes it's not compatible with are rotating ones like the Revolution or Sidewinder. view full answer...
Go To Results